Help setting up.

[W6CUX]

HW-101 uses 11-pin plug and +300VDC .
HW-12A uses 11-pin plug and +250VDC
HW-22 uses 8-pin plug (xcver end) and +250VDC.

All these rigs have their own bias adjustment and the pot in the power
supply is not used.

The RCA connector, if from the 11-pin socket, could be for T/R control of a
SB-200.

All pertinent schematics are on BAMA at:
 http://bama.edebris.com/manuals/heath/

73, Stu W6CUX

----- Original Message ----- 
From: "W1CNY Bob Rinaldi" <w1cny at COMCAST.NET>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Monday, July 18, 2005 6:56 AM
Subject: [HEATH-TEMPE] Help setting up.


Hello folks:

I have a few rigs, power supplies and cables I'll be selling.  But before I
do, I need to test them out completely.

Here's where I need help...as I don't have manuals.

I have an HW-100, HW-12A and an HW-22.  Plus power supplies HP-23, 23B, 23C.
Plus a bunch of 8 and 11 pin interconnect cables, some with an extra RCA
terminated cable.

Could someone let me know which PS should go to which rig, and which cable
to use. And what is the difference in the power supplies?

Thanks in advance for helping me with this puzzle !

73, Bob
W1CNY
All outgoing mail and files scanned by GRISOFT ANTI-VIRUS PROFESSIONAL
EDITION.

 http://www.w1cny.com/w1cny-1

 "A clean ham shack is the
  sign of a sick mind....."

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html