HW-101 INFO NEDED

[Glen Zook]

What I do is to listen to the signal on a separate
receiver.  Tune the receiver for a "comfortable" tone
frequency.  You can easily "null" the balanced
modulator by adjusting the signal for minimum audio
volume.  You can use any frequency although I normally
use either 80 or 40 meters.

Otherwise you need a sensitive r.f. voltmeter.  I find
using the separate receiver method very easy and very
fast to accomplish "nulling" the carrier.

Glen, K9STH


--- Murray Grandy <mgrandy at TELUS.NET> wrote:

"Turn mic level fully counterclockwise" and adjust
carrier null for min rf. There is no rf with mic
control in this position.

Glen, K9STH

Web sites

http://home.comcast.net/~k9sth
http://home.comcast.net/~zcomco

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html