[Boatanchors] Yoiks! A restorers worst nightmare

[Larry Taft]

Threaded rod and a handfull of nuts and washers.  Fixes lots of things 
mechanical in the radios.

73, Larry  K2LT  drakerepair.com

Al Parker wrote:
> Hi Dick,
>     You won't be able to solder the aluminum at all unless you're using
> something very special to do it.
>     I'm having a little trouble visualizing the part, but I'd suggest
> butting the broken parts together & using an epoxy to surround the joint,
> and hold it tight until set.  JB Weld, or some such.
>     Is it an aluminum rod or shape that has tapped holes at each end?
> Might not be hard to duplicate.
> 73,
> Al, W8UT
> New Bern, NC
> BoatAnchors appreciated here
> http://www.boatanchors.org
> http://www.hammarlund.info
>
> ----- Original Message ----- 
> From: "Dick KF4NS" <kf4nsradio at verizon.net>
> To: <boatanchors at mailman.qth.net>; <HEATH at LISTSERV.TEMPE.GOV>;
> <heathkit at mailman.qth.net>
> Sent: Tuesday, February 06, 2007 9:57 AM
> Subject: [Boatanchors] Yoiks! A restorers worst nightmare
>
>
>   
>> HELP! I was restoring my Heathkit LG-1 RF Laboratory Generator,
>>     
> replacing
>   
>> all caps and out of tolerance resistors, etc., and had just finished the
>> last step when I noticed that the aluminum spacer in the oscillator
>> compartment had fallen off. The upside down unit was resting on it and
>> apparently snapped it off at the threads.
>>
>> Why couldn't I have broken a part that was easily replaceable? It is
>>     
> Heath
>   
>> part number 255-8 and is an aluminum spacer 4 inches long with 7/16 inch
>>     
> of
>   
>> 6-32 threads on each end. Please check your parts boxes and see if you
>>     
> have
>   
>> something like that. The only alternative is to try to jury rig it with
>> solder or maybe even a metal based filler compound. I already tried to
>> solder it with the 140W gun but not enough heat to hold the aluminum to
>>     
> the
>   
>> copper enclosure. Hate to use a torch because, well you know why.
>> 73, Dick KF4NS
>> St Petersburg, FL 33714 USA
>> Keep The Glow!
>>
>> _______________________________________________
>> Boatanchors mailing list
>> Boatanchors at mailman.qth.net
>> http://mailman.qth.net/mailman/listinfo/boatanchors
>> ** List Administrator - Duane Fischer, W8DBF/W9WZE **
>> ** For Assistance: dfischer at usol.com **
>> $$ For vintage radio info, see the HCI web site $$
>> http://www.w9wze.org
>>
>>     
>
>
> _______________________________________________
> Boatanchors mailing list
> Boatanchors at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/boatanchors
> ** List Administrator - Duane Fischer, W8DBF/W9WZE **   
> ** For Assistance: dfischer at usol.com **         
> $$ For vintage radio info, see the HCI web site $$      
> http://www.w9wze.org    
>
>
>
>   

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html