SB-102, the saga continues

[Emil Dular]

Thanks to all,

A couple have pointed out the finals must be self-excited. 

I pulled the the driver and also subbed another 6CL6. With the tube out of
the circuit the idling plate current on all bands goes about 60 milliamps.
With a tube in and the bias adjusted for 50 milliamps on 80 meters it is 50
on all the other bands except 40 meters. A quick check with "original" 6CL6
it will be anywhere from 150 to 250 milliamps and bias adjustment has no
effect. And it is oscillating to beat the band, plenty of something into the
dummy load. The second driver starts out at 60 or so milliamps but with
seconds starts a slow rise over the next 5 seconds to 150 milliamps.
Swapping out drivers was the second thing I tried.  Neutralizing the finals
again was first. What am I not seeing?  Guess the next thing to do is slide it out of the case and see if doing the voltage checks gives me a clue.

Emil WD4SCZ

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html