Re the "frozen" switch

[Keith Harvey]

A trick I have used many times, works really well.
Use a small butane torch or a butane BBQ lighter, apply
heat to the end of the shaft, being careful not to damage
paint or decals. Twiddle the shaft with a small locking Visegrip
and in a few minutes, after the congealed grease has melted,
a working switch....

Cheers


Keith Harvey VA3KRV
Campbellford, Ontario, Canada
Grid FN14ci

APRS Weather Station VE3KHV
www.findu.com/cgi-bin/wxpage.cgi?call=VE3KHV

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/HEATH.html