D104 for use with a HW 101 of a HW 22 Heatkit transceiver

[Glen Zook]

The standard (non amplified base) version of the D-104 should work fine with both since they require a high impedance microphone.  If you have one of the amplified bases make sure and turn down the gain control to prevent over-driving the audio input.

The amplified base versions will work with just about any rig that has a medium impedance (between 500 ohms and 600 ohms) up through those with high impedance inputs.  You just have to adjust the gain control (located on the bottom of the base through a hole in the bottom cover) to make sure you do not over-drive the input.

Glen, K9STH

Website:  http://k9sth.com


--- On Mon, 3/2/09, Jerry Rego <Jerry_Rego at COMCAST.NET> wrote:

Does anyone know if a D-104 mic's will work on a HW 22 or a HW 104.  All input is greatly appreciated with suggestions on which mic's will be suitable for use in the above Model's mention.  Thanks Gentlemen for replies. Your input will be most appreciated.


      

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/HEATH.html