[Heath] Fwd: SB-1000 high swr on transmit.

[N4ch at aol.com]

Does the amp work properly on other bands besides 40 meters  ?   If so, I'd 
suspect a problem in one of the components in the 40  meter tuned input 
circuitry (including possibly a bad contact on its associated  bandswitch 
section).   The tuning of the 40 meter coil in the tuned  input is probably NOT 
the problem, as this circuitry is very low "Q", and the  SWR being so high is 
probably due to a bad component or bad connection  somewhere.
 
Good luck and 73, Herman,  N4CH
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/heath/attachments/20110124/a97e15da/attachment.html>
-------------- next part --------------
An embedded message was scrubbed...
From: Jan Sluchak <jsluchak at pacbell.net>
Subject: [Heath] SB-1000 high swr on transmit.
Date: Mon, 24 Jan 2011 11:07:08 -0800 (PST)
Size: 5861
URL: <https://puck.nether.net/pipermail/heath/attachments/20110124/a97e15da/attachment.mht>