[Heath] HW-101 LMO alignment

[Howard Holden]

Maybe the 100Khz tracking pin (as read on the upper dial) is off by one revolution? That’d be my first guess instead of the adjusting caps.

Howie WB2AWQ

From: Jim's 
Sent: Monday, March 30, 2015 3:49 PM
To: heath at puck.nether.net 
Subject: [Heath] HW-101 LMO alignment

I have discovered the VFO on my HW-101 is 100khz off. What are the  procedures for adjusting VFO for the correct output. Which trimmer cap adjust the upper freq and which adjust the lower. 

 

Thanks 

Jim K8DHC



--------------------------------------------------------------------------------
_______________________________________________
Heath mailing list
Heath at puck.nether.net
https://puck.nether.net/mailman/listinfo/heath
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/heath/attachments/20150330/d472120c/attachment.html>