[Heath] LMO rebuilding....did I mess it up?

[Glen Zook]

I think I have a solid-state LMO in the workshop.  I will try to find it and then see which side needs to be removed.

 Glen, K9STH 
Website: http://k9sth.net

      From: Robert Myers <rsmyers at rogers.com>
 To: 'Glen Zook' <gzook at yahoo.com>; heath at puck.nether.net 
 Sent: Tuesday, March 15, 2016 4:07 AM
 Subject: RE: [Heath] LMO rebuilding....did I mess it up?
   
Hi Glen,

You write in your PDF on the tube type LMO:  
“Next, one of the “L” shaped side panels has to be removed.  It is best to remove the panel on the same side as the oscillator tube.  There are no internal parts connected to this side whereas there are components attached to the other side...”

Can you tell us which side of the solid state LMO used on the SB-303 should be removed similar to the above instructions, please?  I am not sure what the subtle differences are, if any, for disassembling/reassembling that LMO compared to the tube version, but would like to know.  I have a SB-401 / SB-303.

  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/heath/attachments/20160315/728902b9/attachment.html>