[Heath] SB102 Main Tuning Knob And Friction Wheel

[Guy Giacopuzzi]

You really mean "up" not down, right Ken?  You move the friction wheel, 
not the dial per se...

Guy

On 5/31/2018 11:44 AM, Kenneth G. Gordon wrote:
> On 31 May 2018 at 17:24, Glen Zook via Heath wrote:
>
>> No "O" ring on the mechanism that turns the LMO in any of the Heath SB-Line
>> equipment.  The friction ring sits so that there is one portion on each side of the
>> inner ring of the dial.  This is adjusted by moving the assembly up, or down, on
>> the inner ring.  The adjustment is correct when the dial can be turned through a
>> full 360-degrees without slipping or binding.
>>
>>
>> It sounds like someone tried to use an "O" ring to provide friction instead of
>> properly aligning the drive.
> Glenn is absolutely correct...as usual.
>
> Also, don't push the thing down so far that it actually wears on the inner ring.
>
> Ken W7EKB
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
> _______________________________________________
> Heath mailing list
> Heath at puck.nether.net
> https://puck.nether.net/mailman/listinfo/heath
>
>

-- 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/heath/attachments/20180531/b8c106a2/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 2012email_signature.jpg
Type: image/jpeg
Size: 117949 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/heath/attachments/20180531/b8c106a2/attachment-0001.jpg>