[j-nsp] Will GE-LX and GE-LH PICS interoperate?

[Daniel Roesen]

On Thu, Nov 13, 2003 at 04:10:07PM -0800, joe mcguckin wrote:
> According to OCP's datasheets, the modules used by Juniper have a RX
> frequency range of 1100 to 1600nm.

Interesting... thanks for this.

Another issue that may arise is that the LH RX might be not sensitive
enought to receive a signal from an LX TX at the end of the LX range.
I'll leave it to others to do the budget maths and prove/disprove
my worries. :-)


Best regards,
Daniel