[j-nsp] ISIS overload bit settings

[Michael Lyngbøl]

On 29.09.2003 21:13:29 +0000, Umar.Ahmed at equinoxsolutions.com wrote:
>  Daniel,
> 
> I thought on-startup was only supported by the erx series routers ?

No,

[edit]
lyngbol at foo# set protocols isis overload timeout 60    

[edit]
lyngbol at testnxj1# show protocols isis overload 
timeout 60;


/Michael

> -----Original Message-----
> From: Daniel Roesen
> To: juniper-nsp at puck.nether.net
> Sent: 29/09/2003 17:23
> Subject: Re: [j-nsp] ISIS overload bit settings
> 
> On Mon, Sep 29, 2003 at 06:21:18PM +0200, Daniel Roesen wrote:
> > On Mon, Sep 29, 2003 at 12:15:45PM +0100,
> Umar.Ahmed at equinoxsolutions.com wrote:
> > > Just trawled through the Juniper website trying to find out if JunOS
> > > supports anything similar to the "on-startup" or "wait-for-bgp"
> command.
> > > This makes IS-IS wait for BGP to converge before clearing the
> overload bit.
> > 
> > Doesn't exist (sadly).
> 
> Sorry, I have to clarify: something like "on-startup" exists
> as "set protocols isis overload [timeout <seconds>]". But there is
> nothing which watches for BGP keepalives in order to have a heuristic
> for "BGP converged".
> 
> 
> Best regards,
> Daniel
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
> 
> 
> ------------------------------------------------------------------------------------------
> Equinox Converged Solutions Limited.
> Tel: +44 (0)1252 405 600
> http://www.equinoxsolutions.com
> 
> IMPORTANT NOTICE:
> This message is intended solely for the use of the Individual or organisation to whom it is addressed. It may contain privileged or confidential information.  If you have received this message in error, please notify the originator immediately.
> If you are not the intended recipient, you should not use, copy, alter, or disclose the contents of this message.  All information or opinions expressed in this message and/or any attachments are those of the author and are not necessarily those of Equinox Converged Solutions Limited.
> Equinox Converged Solutions Limited accepts no responsibility  for loss or damage arising from its use, including damage from virus.
> ------------------------------------------------------------------------------------------
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
> 

-- 
Michael Lyngbøl -- michael at lyngbol dot dk
Network Architect, AS3292 TDC, IP·backbone