[j-nsp] 4CHDS3 and M40, T1 interfaces won't come up

[James Sneeringer]

On Mon, Jul 05, 2004 at 07:41:27PM -0400, Eric Van Tol wrote:
> That is not a correct config for a CT3, which is probably why you are
> receiving a 'device not found' error.  All CT3 configs actually go into
> the first channel on the CT3 with no-cbit-parity configured, as such:
> 
> interfaces {
>    t1-4/3/0:0 {
>      t3-options {
>          no-long-buildout;
>          no-cbit-parity;
>      }
>    t1-4/3/0:26 {
> ...

That makes sense, thank you!  Unfortunately, making this change still has
no effect on the behavior I'm seeing.

-James