[j-nsp] Static routes with aggregation switches

sthaug at nethelp.no sthaug at nethelp.no
Thu Jul 8 08:45:11 EDT 2004


> I have:
> 
>  M20 -gig1--> Agg-Switch -gig2-> CustomerSw
> 
> I static route 10.1.95.0/24 to next-hop on CustomerSW, I yank gig2 and the
> 10.1.95.0/24 static route is still showing "Active".

Obviously - I would expect it to be active as long as the gig1 link to
Agg-Switch is up.

> Of course, if I yank
> gig1 the prefix goes away.  Is it possible to do what I want with an
> aggregation switch and static routing,

What kind of mechanism do you expect to use to discover that gig2 goes
down, if you don't want to use a dynamic routing protocol?

Steinar Haug, Nethelp consulting, sthaug at nethelp.no


More information about the juniper-nsp mailing list