[j-nsp] Cisco to Juniper STM1 config

[Erik Haagsman]

Hi Mark,

Are the links at least synching when plugged in back-to-back...?

Cheers,

Erik

On Tue, 2004-07-20 at 17:38, Mark Johnson wrote:
> Hi,
> 
> I am trying to get a Cisco 7200 PA-OC3-SMI talking to a Juniper PE-4OC3-SMI card without much luck. This is currently back to back
> as a test but will have a telco provided SDH STM-1 circuit soon. I can get two Cisco's to talk directly no problem.
> 
> This is a simple point to point circuit. Could someone provide sample config for these as a back to back and also for when there is
> a real circuit?
> 
> (I'm new to Junipers and only have an old M5 to play with. Our new M7i's are due in a week or two)
> 
> Kind regards,
> 
> Mark
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
-- 
---
Erik Haagsman
Network Architect
We Dare BV
tel: +31(0)10 7507008
fax:+31(0)10 7507005
http://www.we-dare.nl