[j-nsp] Re: Cisco to Juniper STM1 config **success**

[Mark Johnson]

Thanks to everyone that replied. From a combination of the posts it now works fine.

Kind regards,

Mark


----- Original Message ----- 
From: "Mark Johnson" <juniper-nsp at avensys.net>
To: <juniper-nsp at puck.nether.net>
Sent: Tuesday, July 20, 2004 4:38 PM
Subject: Cisco to Juniper STM1 config


> Hi,
>
> I am trying to get a Cisco 7200 PA-OC3-SMI talking to a Juniper PE-4OC3-SMI card without much luck. This is currently back to back
> as a test but will have a telco provided SDH STM-1 circuit soon. I can get two Cisco's to talk directly no problem.
>
> This is a simple point to point circuit. Could someone provide sample config for these as a back to back and also for when there
is
> a real circuit?
>
> (I'm new to Junipers and only have an old M5 to play with. Our new M7i's are due in a week or two)
>
> Kind regards,
>
> Mark
>