[j-nsp] PIC Compatibility Matrix

[Jonas Frey (Probe Networks)]

Wow, and i thought i was already voiding warranty :)


-Jonas

On Fri, 2004-03-26 at 01:03, Richard A Steenbergen wrote:
> On Thu, Mar 25, 2004 at 11:49:21PM +0100, Jonas Frey (Probe Networks) wrote:
> > 
> > A PE Module will definitivly not work in a M160, thats mainly because it
> > has a completly other design and form factor.
> 
> As stated in other e-mail, this will work perfectly fine provided you 
> screw on the little black plastic rails that expand the P/PE card width to 
> M160 size. You can also screw on an M160 faceplate, or if you're really 
> ghetto fabulous you can run it without (or with a home-made plate).
> 
> > I am not sure if these rules apply if you are using FPC2/3 or E-FPC or
> > even FPC-E, but i think they still will.
> 
> The T-series FPC1/FPC2 direction seems to be to support the actual M160 
> PICs instead of issueing a new series, so there is probably no reason you 
> couldn't put a PE in a T320-FPC1...