[j-nsp] ssh (cli?) differences in 6.4R2.

Daniel Roesen dr at cluenet.de
Tue Nov 16 08:22:43 EST 2004


On Tue, Nov 16, 2004 at 04:37:30AM -0800, Paul Goyette wrote:
> Your observation is correct.  If "ssh <router> <command text>" is
> used, and the <command text> is present, then we start /bin/sh
> rather than the JUNOS CLI.  This is done in order to enable some
> other functionality (details irrelevant).
> 
> Since the ability to pass any <command text> to the router was
> never documented, this change did not warrant a release note.
> The capability is still unsupported (except for the specific case
> for which it was enabled).

So why does your collegue say:

<c>
This defect has been fixed recently under PR/32583 ( committed in JUNOS
6.4R3  7.0R2 and higher ).
</c>

So obviously it _is_ seen as unwanted behaviour and a workaround was
found to still enable your direct sh access for whatever feature. :-)


Best regards,
Daniel

-- 
CLUE-RIPE -- Jabber: dr at cluenet.de -- dr at IRCnet -- PGP: 0xA85C8AA0


More information about the juniper-nsp mailing list