[j-nsp] MPLS transport / 1GE-LH
Richard A Steenbergen
ras at e-gerbil.net
Thu Oct 21 17:54:37 EDT 2004
On Thu, Oct 21, 2004 at 10:22:21AM +0200, Jonas Frey wrote:
> i am working on setting up MPLS here and am wondering if someone has a
> small code sniplet/example of the following:
> FE port on M20 -> STM16 -> FE port on M20
> I basically need to transport FE over the existing link.
> Also i wonder if the Px-1GE-LH interfaces support CCC/MPLS vlans as
> there is no -B version of these. Anyone knows?
The LH's and the short-lived I-4GE were apparently never made without
VLAN-CCC support, hence there is no -B model. The same thing applies to
all 2GE and 4GE cards for M160.
Richard A Steenbergen <ras at e-gerbil.net> http://www.e-gerbil.net/ras
GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)
More information about the juniper-nsp