[j-nsp] MLPPP question

[Khawaja, Kashif]

Apparently, the LS PIC does not work with an SCB with IP 1.0. Used an
IP2 based SCB and the bundle seems to be working.

Thanks Josef!

-----Original Message-----
From: Josef Buchsteiner [mailto:josefb at juniper.net] 
Sent: Wednesday, September 01, 2004 1:35 AM
To: Khawaja, Kashif
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] MLPPP question


this means that the bundle and link-members are correctly setup in the
kernel  but once the kernel tries to program the pfe it fails to do is
and  there  was an error in the communication towards the PFE. All the
rest  are  just follow up errors since the kernel tries to install the
routes and also tries to collect statistics where we do get an error as
well  but  the  main issue is why we fail to communicate the interface
creation. I wondering if you have the CDS3 with IQ or without. This is
not related to the remote site connected to the bundle. The best would
be you create a support case and that we look online at the SCB to see
what happen. Hard to say now what this is.

thanks
Josef