[j-nsp] Juniper T1 Cross Connect M40

[Matt Yaklin]

On Thu, 11 Aug 2005, Erik Sundberg wrote:

> Hello,
>
> We have a juniper m40 and we are tring to setup a cross connect between 2
> t1, (cisco-hdlc). The t1's come in to the m40 by a Channelized ds3. I am
> looking on juniper site for some examples and reading up on it. just wonder
> if anyone has tried this and if there is anything to watch out for??
>

I am also interested in this. Can the Juniper M40 act like a
Eastern Research (aka Lucent DACS)? As in cross connecting
DS0s, DS1s, and DS3s (STS1s).

This would be for the t1, DS3, and Sonet interfaces.

Can it carry voice calls in other words?

Thank you for your time,

matt

> And if anyone would be so kind to send me a example of a t1 cross-connect
> using Cisco hdlc that would be greatly appreciative.
>
> Layout
> ------
> customer router
> t1 line
> M13 Mux
> channelized ds3
> m40 crossconnect
> channelized ds3
> m13 mux
> t1
> customer router
>
>
> Thanks
>
> Erik
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>