[j-nsp] NAT support

[Steve Leibrock]

Hello, I am in the process of trying to configure one way NAT on a Juniper M20. I have a device that sits on a 10.1.1.0 fe-0/1/0 interface and I want to have 3 hosts on this network defined to NAT to 3 public addresses and reachable thru the fe-0/1/1 interface which has public ip's.. Does anyone know how to set the config for this. 
 
The way I would like to set it up is as follows;
 
10.1.1.11 - 67.63.13.11
10.1.1.12 - 67.63.13.12
10.1.1.13 - 67.63.13.13
 
Thanks in advance
 
Steve
 
 
 
 
 


Steve Leibrock, CTO
Datum Global Solutions
50 Cragwood Road, Suite # 308
South Plainfield, New Jersey 07080
(908) 668-8808 x230
www.datumglobal.com