[j-nsp] J2300 bug?

[Josef Buchsteiner]

Eric,

This  is  tracked under PR61543 and fixed in 7.2R3 7.3R2 onwards. This
is  a  regression  on  the  changes  we  have done to support an empty
prefix-list which has been added in 7.2+

Josef


Tuesday, July 26, 2005, 11:38:54 PM, you wrote:

   
   
EVT> Hi all,
EVT>  Just upgraded three J2300 routers in our lab to 7.3R1.5 yesterday.  Ran
EVT>  into the following after configuring a prefix-list using "apply[-path":
 
EVT>  admin at j2300.r3# commit
EVT>  assertion "socktype(route->rfe_addr) ==
EVT> rf_tree->rf_family" failed: file
EVT> 
EVT> "../../../../../src/juniper/usr.sbin/rpd/common/route_filter.c",
EVT> line
EVT>  247
EVT>  error: Check-out pass for Routing protocol daemon (/usr/sbin/rpd) dumped
EVT>  core (0x86)
EVT>  error: configuration check-out failed
 
EVT>  I'd normally send this right to JTAC, but I don't have contracts on
EVT>  these boxes, as they're only lab routers.  Would anyone from Juniper
EVT>  care to look into this, or maybe someone else out there has seen it and
EVT>  already opened a PR?
 
EVT>  Thanks in advance,
EVT>  evt
 
EVT>  _______________________________________________
EVT>  juniper-nsp mailing list juniper-nsp at puck.nether.net
EVT>  http://puck.nether.net/mailman/listinfo/juniper-nsp