[j-nsp] m7i & Cat 6500

[Jeremy]

Can you paste in a show chassis hardware identifying what kind of FE PIC 
you are working with?  Many of the Juniper FE PICs are 100Mbps only.

info at beprojects.com wrote:

>I've got a Juniper M7i and it is being connected to a Catalyst 6509.  No 
>matter what I do, I cannot get a link between the two.  The Juniper is 
>running 7.2R1.7 (I don't control the Cat, so I can't see what it is 
>running).  The Cat is supposed to be full/10.  I've set full 10, full 
>100 and auto and nothing works.  I unplug it from the M7 and plug it 
>into a cheap switch and get link right away.  I've used crossover and 
>straight through cables, I've moved a cable from another FE on the same 
>M7 and it gets link on the questionable port.  I've moved the 
>non-working link to another known good port and I don't get a link.  I'm 
>at a loss as to what to try next.  Any ideas or settings I can try?
>
>Thanks.
>
>Peder
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net
>http://puck.nether.net/mailman/listinfo/juniper-nsp
>
>  
>