[j-nsp] RSVP problem

[Jeremy Wallace]

snort bsd wrote:

>Hi
>
>RSVP configuration is simple, but in my case it is
>just not working. The configuration has no logical
>routers and just simple turn RSVP on four routers, but
>RSVP can find its neighbors:
>
>admin at MEXNEXCTIJA> show rsvp neighbor
>RSVP neighbor: 0 learned
>
>
>
>admin at lab-0> show rsvp session lsp
>Ingress RSVP: 0 sessions
>Total 0 displayed, Up 0, Down 0
>
>Egress RSVP: 0 sessions
>Total 0 displayed, Up 0, Down 0
>
>Transit RSVP: 0 sessions
>Total 0 displayed, Up 0, Down 0
>
>admin at lab-1> show rsvp interface
>RSVP interface: 2 active
>                  Active Subscr- Static      Available
>  Reserved    Highwater
>Interface   State resv   iption  BW          BW       
>  BW          mark
>so-1/1/0.0  Up         0   100%  155.52Mbps 
>155.52Mbps  0bps        0bps
>so-2/0/0.0  Up         0   100%  155.52Mbps 
>155.52Mbps  0bps        0bps
>
>any suggestions?
>
>Thanks in advance
>  
>

Do you have any LSPs defined under protocols mpls?  RSVP won't establish 
a neighbor until there is an LSP traversing the link.  Once RSVP begins 
to signal an LSP, you should see your neighbors.