[j-nsp] Multiple sites in the same vpls routing-instance

[Per Ole Klemetsrud]

What are you trying to acomplish?  The "site-identifier" is merely a PE 
identifier used for signalling.

=) PO


On Thu, 17 Mar 2005, Bala Venkata wrote:

> Why is it invalid to add more than one sito to a vpls
> instance (JunOS version 6.4R1.6) ? See below for
> config and error message:
>
> ---------------------------------------------------
> [edit routing-instances bvVpls]
> admin at nmspe2# show
> instance-type vpls;
> interface ge-0/3/0.1000;
> interface fe-0/1/0.1000;
> route-distinguisher 65000:100;
> vrf-target target:65000:200;
> protocols {
>     vpls {
>         site-range 10;
>         site site0001 {
>             site-identifier 1;
>         }
>         site site0002 {
>             site-identifier 2;
>         }
>     }
> }
>
> [edit routing-instances bvVpls]
> admin at nmspe2# commit check
> [edit routing-instances bvVpls protocols vpls]
>   'site'
>     L2VPN/VPLS: only one site allowed under a vpls instance
> error: configuration check-out failed
>
> [edit routing-instances bvVpls]
> admin at nmspe2#
> ---------------------------------------------------
>
>
> TIA !
>
> /bala
>
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>