[j-nsp] rsvp and l3vpn
Nabarun Baks
nm.baks at gmail.com
Wed Nov 2 01:08:32 EST 2005
Hi,
I am trying to setup a l3vpn using rsvp as the tunnel protocol. On
one side there is a cisco-7200 as a PE router and on the other side I am
running my own implementation of l3vpn.
The topology is like the following:
own own cisco
CE1--[PE1]---[P1]---[PE2]--CE2
I have established ospf-te session and advertised TE lsa's between P1
and PE2. But after that we expect cisco to send path message which I am
not getting and i get the following on CISCO debug:
1d22h: RSVP 120.120.120.1_0->120.120.120.142_0[0.0.0.0 <http://0.0.0.0>]:
Refresh Path
psb = 67067268 refresh interval = 0mSec
1d22h: RSVP: can't forward Path out received interface
120.120.120.1 <http://120.120.120.1> is the interface address of PE2 and
120.120.120.142 <http://120.120.120.142> is
address of P1.
The RSVP session is not coming up though the BGP session between two
PEs is coming up.
Any help on this issue.
Regards
Nabarun
More information about the juniper-nsp
mailing list