[j-nsp] rsvp and l3vpn

[Erdem Sener]

Hi,

 Can you provide a bit more info ? Like interface/rsvp/mpls config from boxes?

Cheers,
Erdem

On 11/2/05, Nabarun Baks <nm.baks at gmail.com> wrote:
>  Hi,
>
> I am trying to setup a l3vpn using rsvp as the tunnel protocol. On
> one side there is a cisco-7200 as a PE router and on the other side I am
> running my own implementation of l3vpn.
>
> The topology is like the following:
>
>
> own own cisco
> CE1--[PE1]---[P1]---[PE2]--CE2
>
> I have established ospf-te session and advertised TE lsa's between P1
> and PE2. But after that we expect cisco to send path message which I am
> not getting and i get the following on CISCO debug:
>
> 1d22h: RSVP 120.120.120.1_0->120.120.120.142_0[0.0.0.0 <http://0.0.0.0>]:
> Refresh Path
> psb = 67067268 refresh interval = 0mSec
> 1d22h: RSVP: can't forward Path out received interface
>
>
> 120.120.120.1 <http://120.120.120.1> is the interface address of PE2 and
> 120.120.120.142 <http://120.120.120.142> is
> address of P1.
>
> The RSVP session is not coming up though the BGP session between two
> PEs is coming up.
>
> Any help on this issue.
>
> Regards
> Nabarun
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>