[j-nsp] optical amplifier recommendations?

[Mark Prior]

On 10/11/2005, at 10:26 AM, Andrew Fort wrote:

> Our optical nerds say you might like to check out the Transition
> SFMFF1316-210 (port one = 1300nm SC (2km), port two = 1310nm SC
> (40km)).  These are "OC12 ATM / SDH" stand alone media converters.
> This should handle your S1.1 to L1.2 conversion requirements.

Hi Andrew,

The problem with this kit and the stuff that Matt also suggested is  
that it assumes it's also converting from multi-mode to single mode  
but the Juniper PIC in question is a single mode device.

Mark.