[j-nsp] What are L2 channel errors?

[Matthew Johnson]

This counter increments when the software could not find a valid logical 
interface (that is, something like t3-1/2/3.0) for an incoming frame.

Are you able to use the interface?


MLJ



>From: joe mcguckin <joe at via.net>
>To: juniper-nsp at puck.nether.net
>Subject: [j-nsp] What are L2 channel errors?
>Date: Wed, 5 Apr 2006 11:29:04 -0700
>
>On one of our GigE interfaces, we accumulate L2 channel errors at a
>rate of about 50/sec.
>
>It's plugged into a Cisco switch, serving as a trunked interface.
>
>What is a common cause of this?
>
>Thanks,
>
>Joe
>
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net
>http://puck.nether.net/mailman/listinfo/juniper-nsp