[j-nsp] link 1 sge TX BGAP CRC error
jdisher at macrovision.com
Fri Jul 7 12:53:10 EDT 2006
I seem to recall having the same errors with a bad PIC in our old M20.
I would have to cycle the PIC to get it to come back as well. Replaced
the PIC, the error went away.
Press for replacement, I guess.
> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Tarko Tikan
> Sent: Friday, July 07, 2006 8:30 AM
> To: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] link 1 sge TX BGAP CRC error
> > Jul 6 15:00:03 re0 fpc2 SGE(2/2): link 1 sge TX BGAP CRC error!
> > Jul 6 15:00:03 re0 fpc2 register 0xfe0e0d0a value 0x1
> I've seen exactly same thing on a M10i with:
> PIC 1 REV 07 750-010238 CL0427 1x
> G/E SFP, 1000 BASE
> JTAC didn't say anything special about it and advised to replace PIC.
> Offline/online workaround worked for us aswell until we
> replaced the PIC.
> juniper-nsp mailing list juniper-nsp at puck.nether.net
More information about the juniper-nsp