[j-nsp] Rib groups
peter at mareccy.org
Wed Mar 1 02:40:34 EST 2006
You can also find "auto-export" statement usefull for sharing routes between
on the same PE device.
----- Original Message -----
From: "Piyush Diwedi (GR/EIL)" <piyush.diwedi at ericsson.com>
To: <juniper-nsp at puck.nether.net>
Sent: Wednesday, March 01, 2006 5:10 AM
Subject: [j-nsp] Rib groups
> I have a small GPRS network with 2 M10i routers.
> These routers work in redundant fashion.
> In the config of the router there are rib-groups configured which are
> importing one vrf table to another vrf.
> So my question is that if I have to exchange routes between two VRF;s is
> rib-groups only a way out.
> Kindly reply
> Piyush Dwivedi
> juniper-nsp mailing list juniper-nsp at puck.nether.net
More information about the juniper-nsp