[j-nsp] M20 IPSEC-Key-Management Subsystem Error

[Harshit Kumar]

Nitin,
        Which JUNOS version are you using ? Which PIC are
you using for IPSec ES or ASP PIC ? If ipsec-key-management
is not running, ipsec tunnels will go down. Do you see any 
core dump in /var/tmp or /var/crash/ ? If yes, please 
open a JTAC support case. If you can share the 
config offline that will be helpful too.

thanks
harshit



> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of 
> Nitin.Vazirani at Hutch.in
> Sent: Tuesday, March 07, 2006 9:33 PM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] M20 IPSEC-Key-Management Subsystem Error
> 
> 
> Hello!
> 
> Getting the following error on the M20 when issuing the " sh ike sa "
> and the " sh ipsec sa " commands:
> 
> error: the ipsec-key-management subsystem is not running
> 
> All the IPSec tunnels have gone down, what could be the reason for the
> error and how do I rectify it ?
> 
> Warm Regards,
> Nitin Vazirani
> 
> 
> 
> The information in this message is confidential and may be 
> legally privileged. It is intended solely for the addressee.  
> Access to this message by anyone else is unauthorized.  If 
> you are not the intended recipient, any disclosure, copying, 
> or distribution of the message, or any action or omission 
> taken by you in reliance on it, is prohibited and may be 
> unlawful.  Please immediately contact the sender if you have 
> received this message in error. Thank you. Hutchison Essar Limited.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>