[j-nsp] Exporting inet.0 BGP routes into a VRF instance
Rafal Szarecki (WA/EPO)
rafal.szarecki at ericsson.com
Wed Mar 15 17:02:24 EST 2006
There is at least few way to do this.
One of then can be use of route-target community in global routing table and VRF. Then "auto-export" has to be used. I never try this, but gives hope to simple configuration.
Other option is use of rib-group xxxx [inet.0 vprname.inet.0], and then run BGP on this group xxxx, with policy.
Rafał Szarecki JNCIE
skype me <callto://Rafal_Szarecki/>
> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of
> Mellott, Eric
> Sent: Monday, March 13, 2006 8:50 PM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] Exporting inet.0 BGP routes into a VRF instance
> How can I take BGP routes in the inet.0 table and export them
> into a VRF instance to be redistributed? I do not want all
> routes or even all BGP routes, just a couple of specific BGP routes.
> Thank you,
> juniper-nsp mailing list juniper-nsp at puck.nether.net
More information about the juniper-nsp