[j-nsp] Juniper m320 to alcatel 7670 oc-48 ATM
DARREN HARKINS, BLOOMBERG/ LONDON OF
dharkins at bloomberg.net
Fri Mar 17 13:15:40 EST 2006
Despite what several (4) guys have said in posts off-board :-) I am not insane -
this pic DOES exist. Honestly - really - with an SAR and everything.
http://www.juniper.net/techpubs/hardware/m320/m320-pic/atm2-oc-48.html#atm2-oc-4
8
Has ANYONE else got one of these working?
D
@>;-->-- VITAM ET SANGUINEM --<--;<@
----- Original Message -----
To: JUNIPER-NSP at PUCK.NETHER.NET
At: 3/17 15:54
Guys and Dolls,
We are trying to connect an alcatel 7670 SMIR oc48 card to a juniper M320 oc48
atm2 iq pic back to back via fibre - no AM etc. - default sonet configs on both
sides. No matter what we tweak we allways see rdi-p incoming into the M320, and
no errors seen on the 7670. when putting a protocol analyser inline. g1 byte
was ox00 from M320 into the 7670, and g1 byte was 0x02 from 7670 into M320.
I have a horrible feeling I am making this MUCH too complicated. Ideas please,
configs and outputs available if anyone is interested :-)
Thanks in advance for any help.
Darren
dharkins at bloomberg.net
@>;-->-- VITAM ET SANGUINEM --<--;<@
More information about the juniper-nsp
mailing list