[j-nsp] M7i interface cards part numbers

[Jee Kay]

Is there any way to extra the 'P/N' shown in 'show chassis hardware'
from a Juniper part number? Specifically, I need to know if the E1
card known as PE-10CHE1-RJ48-QPP on Juniper's website (channelised 10
port E1 QPP PIC) is the same as the card that shows up as follows in
show chassis:

  PIC 0          REV 13   750-007626   [sn]            10x CHE1 IQ

If it makes any difference, the extensive output is:

  PIC 0          REV 13   750-007626   [sn]            10x CHE1 IQ
 Jedec Code:   0x7fb0            EEPROM Version:    0x01
 P/N:          750-007626.       S/N:               S/N [sn].
 Assembly ID:  0x0272            Assembly Version:  01.13
 Date:         06-10-2004        Assembly Flags:    0x00
 Version:      REV 13.....
 ID: 10x CHE1 IQ
 Board Information Record:
  Address 0x00: 36 01 01 ff ff ff ff ff ff ff ff ff ff ff ff ff


Thanks in advance,
Ras