[j-nsp] M7i interface cards part numbers
Erdem Sener
erdems at gmail.com
Wed May 3 13:31:48 EDT 2006
Hello,
You could decode like:
PE - 10CHE1 - RJ48 - QPP
M5-M20 10ports port type IQ PIC
HTH
On 5/3/06, Jee Kay <jeekay at gmail.com> wrote:
> Is there any way to extra the 'P/N' shown in 'show chassis hardware'
> from a Juniper part number? Specifically, I need to know if the E1
> card known as PE-10CHE1-RJ48-QPP on Juniper's website (channelised 10
> port E1 QPP PIC) is the same as the card that shows up as follows in
> show chassis:
>
> PIC 0 REV 13 750-007626 [sn] 10x CHE1 IQ
>
> If it makes any difference, the extensive output is:
>
> PIC 0 REV 13 750-007626 [sn] 10x CHE1 IQ
> Jedec Code: 0x7fb0 EEPROM Version: 0x01
> P/N: 750-007626. S/N: S/N [sn].
> Assembly ID: 0x0272 Assembly Version: 01.13
> Date: 06-10-2004 Assembly Flags: 0x00
> Version: REV 13.....
> ID: 10x CHE1 IQ
> Board Information Record:
> Address 0x00: 36 01 01 ff ff ff ff ff ff ff ff ff ff ff ff ff
>
>
> Thanks in advance,
> Ras
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>
--
Erdem
"http://tr1.monstersgame.net/?ac=vid&vid=20030512"
More information about the juniper-nsp
mailing list