[j-nsp] PE-4FE-TX not transmitting anything...faulty?

[Ebben Aries]

I have ran into this regarding my post on 3/29.  Attached is a copy of the 
thread.

My problem however was only with 1 port on the P-4FE-TX.  I have not had the 
chance to power cycle the PIC or swap into a different FPC as of yet.  Are 
you seeing the drop counters increase at all or just no traffic sent at all?  
Also, are you seeing any RE bound traffic attempting to be sent when you 
issue 'monitor traffic interface fe-x/x/x' ?

Anyone else out there ran into this?  I am also anxiously awaiting any 
insight.

Thanks,

Ebben


----

From: 
Ebben Aries <earies at uci.net>  (United Communications, Inc.)
  To: 
juniper-nsp at puck.nether.net
  Date: 
2007-03-29 1:09 pm

Hello all,

This is a weird one...... I have a P-4FE-TX that has one interface that is 
displaying the following.

  Output errors:
    Carrier transitions: 0, Errors: 0, Drops: 29052, Collisions: 0, Aged 
packets: 0, FIFO errors: 0, HS link CRC errors: 0, MTU errors: 0, Resource 
errors: 0
  Egress queues: 4 supported, 4 in use
  Queue counters:     Queued packets  Transmitted packets   Dropped packets
 0 best-effort                    3278              0                    0
 1 expedited-forwarding      0                     0                    0
 2 assured-forwarding          0                     0                    0
 3 network-control             29782             0                29052

This is strictly a p2p ethernet link that was working until the 
following......  This interface was put into an 802.3ad bundle attached to 
ae0.0 (this is when it started to drop everything).  The interface was then 
removed and now displays the above.

It appears that BE is neither transmitting nor dropping the packets while 
network-control is dropping virtualy everything.  The interface can RX 
traffic just fine.

BTW, other interfaces on the same P-4FE-TX work fine and there are no firewall 
filters attached to this interface.

Anyone ran into this before ??

--

Ebben




On Monday 16 April 2007 1:48 pm, Jonas Frey wrote:
> Hello,
>
> i've got a PE-4FE-TX here which is not working, it is receiving traffic
> but not transmitting anything.
> See below:
>  MAC statistics:                      Receive         Transmit
>     Total octets                      26985313                0
>     Total packets                       419556                0
>     Unicast packets                       1458                0
>     Broadcast packets                   411000                0
>     Multicast packets                     7098                0
>     CRC/Align errors                         0                0
>     FIFO errors                              0                0
>     MAC control frames                       0                0
>     MAC pause frames                         0                0
>     Oversized frames                         0
>     Jabber frames                            0
>     Fragment frames                          0
>     VLAN tagged frames                       0
>     Code violations                          0
>   Filter statistics:
>     Input packet count                  419556
>     Input packet rejects                     0
>     Input DA rejects                      8556
>     Input SA rejects                         0
>     Output packet count                                       0
>     Output packet pad count                                   0
>     Output packet error count                                 0
>     CAM destination filters: 1, CAM source filters: 0
>
> I've tried everything to get this pic to send out anything...
> It seems it does receive packets but its not transmitting anything. It
> doesnt matter what port i use, none works.
>
> I've tried various devices, duplex/speed settings, tried the PIC in
> various FPCs and even in various M-series.
>
> Does anyone have any idea how i can debug this further or did anyone
> happen to run into the same problem?
>
> Regards,
> Jonas Frey
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp

-- 
Ebben Aries
Lead Network Engineer
United Communications, Inc.
389 SW Scalehouse Ct. Suite 100
Bend, OR  97702
Office: 541.322.1407
Fax: 541.322.1417
earies at uci.net