[j-nsp] l2circuit for frame relay

[Sean Clarke]

At 6:11 PM +0300 8/6/07, Amos Rosenboim wrote:
>Hello All,
>
>We are trying to migrate a frame relay network onto our mpls network, 
>based on juniper M10i routers.
>We are using frame-relay-ccc encapsulation and l2circuit configuration.
>The problem is that we are unable to configure dlci values below 512.
>We get the following error when trying to configure units with dlci 
>below 512:
>
>CCC or TCC on this interface must have a DLCI >= 512
>
>Is this a known limitation?
>Can this be worked around somehow?
>
>This forces us to change dlci values at customers routers, which 
>makes the migration problematic.
>Maybe the choice of ccc encapsulation is wrong, we have chose it just 
>because it is the first configuration we encountered.
>
>Any advice would be welcomed.
>
>
>Regards
>
>Amos


Hi Amos
Depending on hardware/software , you may be able to configure 
"encapsulation extended-frame-relay-ccc" , this should remove this 
limitation

cheers
Sean