[j-nsp] l2circuit for frame relay

GAY Samuel samuel.gay at c-s.fr
Tue Aug 7 03:52:04 EDT 2007


Hi Amos,

Just to complete the excellent answer of Sean.
In the documentation I can read :

"Like Ethernet interfaces, a Frame Relay interface requires the 
specification of CCC encapsulation at both the device and logical unit 
levels. When the device is set to support CCC encapsulation, Frame Relay 
DLCIs range 512 through 1022. DLCIs from 0 through 510 can be used for 
normal Frame Relay traffic."

Regards,

Samuel

>
> Hi Amos
> Depending on hardware/software , you may be able to configure 
> "encapsulation extended-frame-relay-ccc" , this should remove this 
> limitation
>
> cheers
> Sean
>   
-------------- next part --------------
A non-text attachment was scrubbed...
Name: samuel.gay.vcf
Type: text/x-vcard
Size: 318 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/juniper-nsp/attachments/20070807/7112c226/attachment.vcf 


More information about the juniper-nsp mailing list