[j-nsp] Vpls-ldp signaling

[Bourgeois, Jacob (Jake)** CTR **]

This seems like a doc bug, AKAIK, and per 7.6 docs, BGP is still used to
signal VPLS on juniper platforms.

http://www.juniper.net/techpubs/software/junos/junos76/swref76-hierarchy/htm
l/rfc-list2.html#1213459

draft-ietf-l2vpn-vpls-bgp is listed.
draft-ietf-l2vpn-vpls-ldp is not listed.


-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Junos Guy
Sent: Monday, February 26, 2007 8:41 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] Vpls-ldp signaling

Hello ,

How do we configure vpls with ldp signaling ?



As per JunOS 7.6 Feature Release.

LDP Signaling for VPLS
Uses Label Distribution Protocol (LDP) instead of Border Gateway Protocol
(BGP) as the signaling protocol for VPLS
Implemented per draft-ietf-l2vpn-ldp-05
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp