[j-nsp] sonet/sdh parameters

[Guy Davies]

hi,

RS-BIP8 is the Regenerator Section B1 Byte to provide end-to-end
performance monitoring on a single regenerator section.

MS-BIP24 is the Multiplex Section B2 Bytes to provide error monitoring
on the multiplex section.

MS-FEBE is the Multiplex Section Far End Block Error (aka Remote Error
Indication - REI) which is returned in response to receiving MS-BIP.

Rgds,

Guy

On 07/06/07, snort bsd <snortbsd at yahoo.com.au> wrote:
> hi all:
>
> i have some questions regarding some parameters of
> sonet/sdh:
>
> 1) what is RS-BIP8
> 2) what is MS-BIP24
> 3) what is MS-FEBE
>
> i found an old post from marcin; he really explained
> the HP-FEBE and HP-BIP8 very well. it would be great
> if some can also give out sources for those
> parameters.
>
> thanks all
>
>
>
> _________________________________________________________________________________
>
> How would you spend $50,000 to create a more sustainable environment in Australia? Go to Yahoo!7 Answers and share your idea.
> http://advision.webevents.yahoo.com/aunz/lifestyle/answers/y7ans-babp_reg.html
>
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>