[j-nsp] sonet/sdh parameters

[Guy Davies]

You could also take a quick look at
http://www.tek.com/Measurement/App_Notes/sdhprimer/anomalies.pdf which
gives some useful info on SDH anomalies.

Rgds,

Guy

On 07/06/07, Guy Davies <aguydavies at gmail.com> wrote:
> hi,
>
> RS-BIP8 is the Regenerator Section B1 Byte to provide end-to-end
> performance monitoring on a single regenerator section.
>
> MS-BIP24 is the Multiplex Section B2 Bytes to provide error monitoring
> on the multiplex section.
>
> MS-FEBE is the Multiplex Section Far End Block Error (aka Remote Error
> Indication - REI) which is returned in response to receiving MS-BIP.
>
> Rgds,
>
> Guy
>
> On 07/06/07, snort bsd <snortbsd at yahoo.com.au> wrote:
> > hi all:
> >
> > i have some questions regarding some parameters of
> > sonet/sdh:
> >
> > 1) what is RS-BIP8
> > 2) what is MS-BIP24
> > 3) what is MS-FEBE
> >
> > i found an old post from marcin; he really explained
> > the HP-FEBE and HP-BIP8 very well. it would be great
> > if some can also give out sources for those
> > parameters.
> >
> > thanks all
> >
> >
> >
> > _________________________________________________________________________________
> >
> > How would you spend $50,000 to create a more sustainable environment in Australia? Go to Yahoo!7 Answers and share your idea.
> > http://advision.webevents.yahoo.com/aunz/lifestyle/answers/y7ans-babp_reg.html
> >
> >
> >
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
>