[j-nsp] BGP VPLS support

[Manu Chao]

AFAIK vrf-table label only work on a broadcast interface


On 6/18/07, Amos Rosenboim <amos at oasis-tech.net> wrote:
>
> Hello,
>
> Another workaround which we used (and got from this list as well) is
> to configure "dummy" static routes
> Something like route 172.16.80.1/32 next-hop 172.16.80.1
>
> Also vrf-table label does not work on 100% of the pics, I don't have
> a reference to the pic matrix, but I recall we had a problem with the
> 10 X Channelized E1 pic.
>
> Regards
>
> Amos
>
> On Jun 18, 2007, at 6:21 PM, sthaug at nethelp.no wrote:
>
> >>  You need to use eighter vrf-table-label in the routing instance, or
> >> configure a vt- interface with family inet and mpls (no addresses)
> >> and
> >> put it in the instance to have your 'direct' route(s) installed in
> >> your mpls cloud.
> >
> > family mpls is not needed on the vt-interface, family inet is enough.
> >
> > Steinar Haug, Nethelp consulting, sthaug at nethelp.no
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>