[j-nsp] BGP VPLS support

[Erdem Sener]

Here are the limitations:

http://www.juniper.net/techpubs/software/junos/junos83/swconfig83-vpns/id-10993840.html

Cheers,
Erdem

On 6/19/07, Manu Chao <linux.yahoo at gmail.com> wrote:
> AFAIK vrf-table label only work on a broadcast interface
>
>
> On 6/18/07, Amos Rosenboim <amos at oasis-tech.net> wrote:
> >
> > Hello,
> >
> > Another workaround which we used (and got from this list as well) is
> > to configure "dummy" static routes
> > Something like route 172.16.80.1/32 next-hop 172.16.80.1
> >
> > Also vrf-table label does not work on 100% of the pics, I don't have
> > a reference to the pic matrix, but I recall we had a problem with the
> > 10 X Channelized E1 pic.
> >
> > Regards
> >
> > Amos
> >
> > On Jun 18, 2007, at 6:21 PM, sthaug at nethelp.no wrote:
> >
> > >>  You need to use eighter vrf-table-label in the routing instance, or
> > >> configure a vt- interface with family inet and mpls (no addresses)
> > >> and
> > >> put it in the instance to have your 'direct' route(s) installed in
> > >> your mpls cloud.
> > >
> > > family mpls is not needed on the vt-interface, family inet is enough.
> > >
> > > Steinar Haug, Nethelp consulting, sthaug at nethelp.no
> > > _______________________________________________
> > > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>