[j-nsp] L2circuit local-switching

[Alexander Koch]

Jonas,

try proto connections. If it works, be happy. :)
Been there, did that, just did the same, but
actually worked.

-ako

On Thu, 10 May 2007 14:27:53 +0200, Jonas Frey wrote:
> Hello,
> 
> i am trying to configure local-switching via l2circuits.
> Config is pretty straight-forward:
> 
> local-switching {
>     interface ae0.28 {
>         end-interface {
>             interface ge-1/1/0.3;
>         }
> (both interfaces are vlan tagged with the same vlan)
> 
> However this doesnt work. Via show l2circuit connections i get:
>  Local Switch ae0.28 
>     Interface                 Type  St     Time last up          # Up
> trans
>     ae0.28(vc 0)              rmt   NP   
> 
> NP seems to be h/w not present. But the interfaces are there...isnt it
> possible to switch subinterfaces and/or vlan-tagged interfaces?
> 
> Regards,
> Jonas Frey