[j-nsp] Commit failure for IPv6 static route

[Dragan Mickovic]

Can you provide interface config, 'show ipv6 neighbors', and
also try to ping link-local on that interface?


micko

On Fri, May 25, 2007 at 02:36:14PM -0400, Aaron Daubman wrote:
>  Dragan,
> 
>  On 5/25/07, Dragan Mickovic <micko at micko.net> wrote:
> > juniper does not support broadcast interfaces for next-hop, set
> > the next-hop to be an IP.
> 
>  How would I do this when the interface has no unicast global (how
>  would the router know how to reach the next-hop IP?).
> 
>  Also, on the following site, the "Example: Configuring Independent
>  Preferences for an Unnumbered Ethernet Interface" sections shows a
>  broadcast interface being used as the next-hop - why does that example
>  work?
>  http://www.juniper.net/techpubs/software/junos/junos83/swconfig83-routing/id-10373744.html
> 
>  Thanks again,
>      ~Aaron