[j-nsp] frame-relay J6350 to Cisco 2611

[Ivan c]

Hi All,

Looking for a little help with a frame-relay connection between a
Cisco 2611 and a Juniper J6350.

This is the serial interface on the J6350, which I hope can play
frame-relay with IETF?
http://www.juniper.net/products/jseries/dsheet/100116.pdf


This is the Cisco 2611 side of the equation, which is currently
working to a Cisco 7206 which is getting swapped out for the J6350

interface Serial0/0
 mtu 1550
 no ip address
 encapsulation frame-relay IETF
 load-interval 30
 no fair-queue
 frame-relay traffic-shaping
!
interface Serial0/0.199 point-to-point
 ip address 192.168.1.2 255.255.255.252
 frame-relay interface-dlci 199
 crypto map IPSec-con

any ideas for the Juniper side of the equation would be much appreciated.

thanks
Ivan