[j-nsp] Logical Routers intercommunication?

[alain.briant at bt.com]

I am sure that what you're trying to do is working on Little M series (M7i M10i ...)

I have made a lot of tests this way also using some I-BGP or E-BGP between the logical routers.

Are you sure your two logical routers are interconnected via external interfaces or subinterfaces?

Do you have a summary of your config?

Regards
Alain
 

-----Message d'origine-----
De : juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] De la part de Marlon Duksa
Envoyé : vendredi 1 août 2008 16:17
À : juniper-nsp at puck.nether.net
Objet : [j-nsp] Logical Routers intercommunication?

I have partitioned M320 into two logical routers (LR), and I run MP-BGP between them. Those two routers are connected through an external GiGE interface. The problem is that BGP UPDATE and OPEN message between them are not sent over the external link but instead through some interprocess communication. Only keepalives are sent througn the external links.

Like those two logical routers know they are on the same box (which they shouldn't).
Is there any way to disable this inter-router communcation and send all BGP mesages through the exteranl links?
Thanks,
Marlon
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp