[j-nsp] Ospf neighborship

[M.Mihailidis]

Thank you very much for helping me out :>>>>>

----- Original Message ----- 
From: "Alain Briant" <alain.briant at c-s.fr>
To: "M.Mihailidis" <mixalism at gmail.com>; <juniper-nsp at puck.nether.net>
Sent: Monday, January 21, 2008 10:58 AM
Subject: Re: [j-nsp] Ospf neighborship


> Hi
>
> I told you something wrong concerning GRE tunnels as I did some other 
> tests and realized I was wrong
>
> I've checked also unnumberred interfaces witch seem to be possible on 
> Ethernet interfaces in version 8.3 or 8.5
> But documentation says precisely that it not possible to run OSPF in this 
> case:
> http://www.juniper.net/techpubs/software/junos/junos83/swconfig83-network-interfaces/html/interfaces-family-config18.html
>
> "Running OSPF and IS-IS on unnumbered Ethernet interfaces is not 
> supported"
>
> I will tell you if I find any workaround
> regards
> Alain
>
>
>
>
>
> M.Mihailidis a écrit :
>
>> im using j series and ethernet interfaces to which unnumbered doesnt work
>> any help welcome
>> ----- Original Message ----- From: "BRIANT Alain" <alain.briant at c-s.fr>
>> To: "M.Mihailidis" <mixalism at gmail.com>
>> Sent: Saturday, January 19, 2008 12:01 AM
>> Subject: Re: [j-nsp] Ospf neighborship
>>
>>
>> Hi
>>
>> I have made some tests and realized I told you something wrong.
>> In the case of the config I though of, I am using interfaces address
>> in the ospf exchanges.
>>
>>
>> What kind of router are you using J,M, T series ?
>> On witch kind of interface? Lan or other type ?
>>
>> I am trying to find how to achieve that.
>>
>> Regards
>> Alain
>>
>>
>>
>>
>> Quoting "M.Mihailidis" <mixalism at gmail.com>:
>>
>>> any hints on how to do that?
>>>
>>>
>>>
>>> ----- Original Message ----- From: "BRIANT Alain" <alain.briant at c-s.fr>
>>> To: "M.Mihailidis" <mixalism at gmail.com>
>>> Cc: "Juniper-Nsp" <juniper-nsp at puck.nether.net>
>>> Sent: Friday, January 18, 2008 7:54 PM
>>> Subject: Re: [j-nsp] Ospf neighborship
>>>
>>>
>>> Hi
>>>
>>> You can use unnumbered GRE-tunnel.
>>>
>>> Regards
>>> Alain
>>>
>>>
>>>
>>>
>>>
>>>
>>> Quoting "M.Mihailidis" <mixalism at gmail.com>:
>>>
>>>> hello
>>>> is there a way to have ospf adjacencies with the loopback interface and 
>>>> how?
>>>> i tried with ethernet unnumbered refrenced to a loopback  and didnt 
>>>> worked
>>>> i tried ethernet with ip  address and passive in the ospf proccess 
>>>> and that didint work either
>>>> Thanks
>>>> _______________________________________________
>>>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>>>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>>>
>>>>
>>>
>>>
>>
>